HOTLINE0769-38937518

California's 65

California's 65

California proposition 65, the "1986 safety of drinking water and toxic substances enforcement law", in November 1986, the aim is to protect the residents of California and the state's drinking water, the water contains no known may cause cancer, birth defects or other reproductive development harmful substances, and truthfully inform residents when products appear this kind of material.The California 65 Controlled Substances List, which is published quarterly by the OEHHA and first published in 1987, now includes more than 900 substances.

 Core control requirements:

1. No Use of water pollution: No person shall knowingly discharge or release into water supplies or land that may contaminate water supplies any substance known to the State of California that is carcinogenic or reproductively toxic.

2. Warning requirements: After a chemical is placed on a controlled list, manufacturers and distributors must complete the warning within 12 months and terminate the release of the chemical to the source of drinking water within 20 months.After that date, government or individual law enforcement officials, including individuals or organizations representing the public interest, may initiate proceedings against violators of the statute.Warning requirements must be "clear and reasonable" and can take many forms.

3. Limit requirements for Hazardous Substances: The California 65 Control List does not itself set limits for substances. Limit limits for hazardous substances in products, refer to existing lawsuits or agreements against such products. In these documents, limit requirements and test methods for certain substances in certain products may be reached.

4. When conducting the California 65 control, a company shall first compare the material control requirements established in the lawsuit of existing such products, and then investigate the harmful substances in the products with reference to this control.

productmaterial

Standard requirement

Copper container with welded parts

lead:200 ppm

 PVCOuter covering of electric wires and cables (except electric wires and cables inside the product and others that are not frequently touched)

requirements:
1.No lead was intentionally added to the outer layers of the wires and cables,
2.Lead content in the outer layer of wires and cables≦300 ppm

cosmetics

lead≦0.35 ppm(Lipstick and lip gloss)
lead≦0.5 ppm(Other cosmetics)

Bicycle PVC material

Lead may not be added intentionally and:
Handle and cable:
lead≦ 300 ppm (The wheel diameter is > 20 inches)
lead≦ 30 ppm (The diameter of the wheel is ≦20 inches)
All other PVC components: lead≦ 300 ppm

Aluminum cookware

lead> 6 ppb(Require at least 6 random samples for testing) with warning labels

Soft food containers and beverage containers

lead≦ 200 ppm(The inner layer)    lead≦ 600 ppm(The outer layer)

 PVC/ Neoprene and/or other plastic clothing

lead≦ 30 ppm

Glass or ceramic products with exterior decoration

Children's products

Exterior decoration (including fringe areas) lead≦ 0.06  cadmium≦0.48%

food/ Glass ceramic ware for beverage

The trim extends to the edges: lead≦200ppm cadmium≦800ppm(For ceramic products, it shall also meet the requirements of THE United States Material testing Standard for lead and cadmium dissolution)
Decoration not extended to edges: lead≦600ppm cadmium≦4800ppm

non-food/ Glass ceramic products for beverage use

External lead cadmium wipe test, decorative lead≦600ppm cadmium≦4800ppm、Lead cadmium wipe on all surfaces (lead cadmium immersion test is optional for ceramic products) one of three options

 Sports products and weights in PVC or neoprene coating

lead≦200ppm

jewelry

The lead content requirement depends on its material composition and type table

Tel: +86 769 38937518 Email: service@soar-cert.com

Add: Room 1092, No. 12. East of Houjie Avenue, Houjie, Dongguan, Guangdong, China

CopyRight 2023 SOAR 粤ICP备2023127206号